|
|
|
|
|
|
|
|
|
|
|
|
|
|
A much harder tool than the Teflon edge tool, this plastic device is used for the occasional "press-down" of small film creases, or scraping away old film remnants on scratch-sensitive surfaces. Its sharpness allows one to get under border gaskets, and press down stubborn "fingers." Caution must be exercised because of the possibility of scratching film.
|
32 oz. Spray Bottle
|
The Teflon Black 2000 Card gives the greatest gripping power of the trio of White, Gold and Black cards. The white card gives the least friction-grip on film (vital in many situations); the Gold the next level, and the Black the highest grip strength on film surface, all without damage to SR films. Fantastic tool for water & bubble extraction, film manipulation during heat forming, border checking, and gasket retraction. Edge sharpness can be maintained by using a Hard Card Sharpener.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Teflon Gold 2000 and Black card Made from same mold as the White Teflon Edge Squeegee but with material that is more resistant to thermal deformation. The Gold card provides more friction on film for better gripping during the heat forming process and superb water extraction during squeegeeing. Edge sharpness can be maintained by using a Hard Card Sharpener.
|
Combination squeegee/hard card used as a finishing tool during film installation. When wrapped in a layer of cotton fabric or lint-free paper towel it can be used for wicking water out along borders (after an installation) or used for sweeping film flush to the glass during heat forming procedures. Edge sharpness can be maintained by using a Hard Card Sharpener or the ribs on the toll itself..
|
Used for pressing out minor film creases or crimps and retrieving tucked gaskets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
While not actually made of Teflon, this tool is often called the Teflon "hard-card" or "edge tool." It is an essential tool for every installer in every installation situation.
|
This Allway Safety Glass Scraper is one of many top quality items in our Razor Scrapers department. Scraper with exclusive auto blade lock. This scraper uses single-edged razor blades. Excellent for safety, grip strength, and maximum leverage where small blades are needed for film or other glass contaminant removal.
|
High durometer angled squeegee great for: Carding out moisture into corners. Edge sharpness can be maintained by using a hard card sharpener.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The White Scotch-Brite Thick cleaning pads are made of the same material as the White Scotch-Brite pads there is just more of them. The thicker pads allows for a more aggressive cleaning to get the really hard to remove debris off the windows. These nylon pads are a critically important element in the window preparation process. After wetting and razor scraping, the pane is wet again (typically with X-100), and then scrubbed vigorously with this non-scratching pad to break down oily contaminants that a blade cannot remove. These 6 x 10" pads can be cut down into 4 pads at convenient 3" x 5" sizes.
|
Combination squeegee/hard card used as a finishing tool during film installation. Hard edge, when wrapped in a layer of cotton fabric or lint-free paper towel, can be used for getting water out along borders (after an installation). Can be cut to various angle shapes to reach tight, sharp cornered glass areas. Hard-edge sharpness can be maintained by using a Hard Card Sharpener.
|
High durometer angled squeegee: great for carding out moisture into corners. Can be used directly on film surface without scratching.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used as a replacement squeegee for the "Side Swiper" Tool and used in the Unger stainless steel channel as a finishing squeegee for maximum water removal. For use on safety, sputtered, and other slow drying, "High-Tech" films.
|
Combination squeegee/hard card used as a finishing tool during film installation. Can be cut to various angle shapes to reach tight, sharp cornered glass areas. Hard-edge sharpness can be maintained using the hard card sharpener.
|
Heavy-duty spray-head for attachment to 32 oz. spray bottles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Automotive Hard Cards (Same as the Big Foot Squeegee, but without the handle). Excellent, for use as an angled general purpose Hard Card during cleaning and finishing out
|
General purpose, unmarked spray bottle with Adjustable Spray Pump (Trigger) ACT0405. Sometimes professional installers will use a unique or special solution for a specific purpose, such an alcohol/water solution for final window polishing after an installation. An unmarked bottle will clearly be recognized as such, or custom labeled as desired.
|
Re-designed version of the Conqueror with more secure urethane blade attachment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Combination squeegee/hard card used as a finishing tool during film installation. When wrapped in a layer of cotton fabric or lint-free paper towel it can be used for wicking water out along borders (after an installation) or used for sweeping film flush to the glass during heat forming procedures. Edge sharpness can be maintained by using ACT1015 Hard Card Sharpener or the ribs on the toll itself..
|
Also known as the Olfa Silver The SVR-1 is an all stainless steel model. Features a slide lock and pocket clip/blade snapper. Guaranteed forever.
|
Olfa "A" Yellow Knife is a standard-duty cutter with rubber grip insert for maximum control. Uses standard or stainless steel breakaway blades
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by installers to hide fine line mistakes in trimming which cause excess light intrusion at film edge. Considered by the seasoned installer as a last minute/last resort "savior" or "cheater's pen," depending on whether he is using it or someone else.
|
Used by installers to hide large mistakes in trimming which cause excess light intrusion at film edge. Considered by the seasoned installer as a last minute "artist's brush" or "cheater's pen" depending on whether he is using it vs. someone else. In art supply stores, you may also purchase enamel paint markers, excellent for this purpose as well.
|
Used as a hard card-finishing tool for a variety of installation challenges. When wrapped in a layer of cotton fabric or lint-free paper towel, it is used for a) cleaning into corners and along edge gaskets (during glass preparation), b) wicking water out along borders (after an installation), and c) direct squeegeeing of film along borders without any wrapping. Moreover, it can be used for d) easily reaching the lower portion of rear window glass, e) temporarily pulling back rub rails or, f) to reach into sharp angled corners. It is extremely hard, yet (if clean) will not scratch film. Edge sharpness can be maintained by using a Hard Card Sharpener.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Razor blades can be used alone or with TZ-10294612 for necessary glass cleaning / scraping. Note that these blades are not stainless steel and are therefore susceptible to rusting with use.
|
1/2" wide black automotive pin stripe tape used to cover up light gaps left along bottom edges of some rear windows or other glass borders where it may be impossible to apply window film to small inaccessible glass areas (owing to obstructions of interior moldings or tight-fitting carpeted decks).
|
Used for the initial tack-down squeegee after film lay-up (especially on large rear panes), pushing out large areas of air and water. Less likely to cause film creasing during initial tack-down. Often used to squeegee down film on the outside of glass after heat forming to check for fit. Not recommended for final squeegee pass (use the handled BlueMax instead).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This sharpening tool is essential for maintaining the sharpest, smoothest possible edge on any thin, "hard edge" tool, such as the Teflons and Diamond Tips.
|
The Olfa "SVR-2" Professional Silver Knife (Stainless Steel) is a professional cutter designed with an auto-locking blade slide, stainless steel handle, and a built-in safety blade snapper for rapid blade segment change. Accommodates both left and right-handed users. Guaranteed forever.
|
The Blue Max Squeegee Blade is a popular choice for maximum water removal from your automotive or flat glass installations. 93 Durometers (5" X 2" with beveled leading edge)
|
|
|
